Lisebelisoa tsa tšepe kapa tsa aluminium tse sebelisoang haholo mehalang ea phetisetso ka kakaretso li bitsoa li-fittings.Ho na le mefuta e mengata ea li-fittings le litšebeliso tse fapaneng, tse kang li-clamp tse fapaneng bakeng sa ho kenya lithapo, li-loops tse fapaneng tse leketlileng tse etsang letoto la lithapo, li-tubes tse fapaneng tsa crimping le li-tubes tsa ho lokisa bakeng sa lithapo tse kopanyang, le mefuta e sa tšoaneng ea likheo holim'a lithapo tse arohaneng.Lithupa, joalo-joalo, ho phaella ho mefuta eohle ea lisebelisoa tsa terata tse hulang tse sebelisetsoang lipalo le litora, hammoho le boholo ba li-conductor tse sireletsang, li tlameha ho tsamaisana le tse ling.
Li-fittings tse ngata li hloka ho mamella tsitsipano e kholo nakong ea ts'ebetso, 'me tse ling li tlameha ho etsa bonnete ba hore li kopana hantle le motlakase ka nako e le' ngoe.E amana le polokeho ea terata kapa tora.Leha e ka senyeha feela, e ka baka ho hloleha ha mela.Ka hona, boleng, tšebeliso e nepahetseng le ho kenya lisebelisoa ho na le tšusumetso e itseng ho kenngoeng le phetisong ea lithapo tsa motlakase.
| GB 2314-97 | Maemo a akaretsang a tekheniki bakeng sa lisebelisoa tsa motlakase |
| GB/T 2317.1-2000 | Mokhoa oa tlhahlobo ea lisebelisoa tsa motlakase |
| GB/T 2317.3-2000 | Mokhoa oa tlhahlobo oa potoloho ea mocheso bakeng sa lisebelisoa tsa motlakase |
| GB/T 2317.4-2000 | Melao ea kamohelo ea lisebelisoa tsa motlakase, matšoao le ho paka |
| GB/T 9327.4-1988 | Mokhoa oa teko oa khokahanyo ea thapo le mokhoa oa tlhahlobo ea khokahanyo ea mochini |
| GB/T 5075-2001 | Terminology ea lisebelisoa tsa matla |
| DL/T 765.1-2001 | Maemo a tekheniki a li-fittings bakeng sa mela ea kabo e holimo |
| DL/T 768.7-2002 | Lisebelisoa tsa motlakase li etsa likarolo tsa tšepe tsa boleng bo holimo |
| DL/T 683-1999 | Mokhoa oa ho reha mohlala bakeng sa lisebelisoa tsa motlakase |
| GB/T 5231-2001 | Sebopeho sa lik'hemik'hale tsa koporo le koporo e entsoeng ka koporo le sebopeho sa sehlahisoa |
| GB/T 1175-1997 | Kenya motsoako oa zinki |
| Q/ZDJ 50-2006 | Litlhoko tsa tekheniki bakeng sa lithapo tsa ho phunya ka bohale tse nang le litekanyetso tse lekantsoeng tsa 10kV le ka tlase |
Likarolo tse tloaelehileng 'marakeng haholo-holo li kenyelletsa tšepe ea carbon, tšepe e sa hloekang le koporo.1. Tšepe ea carbon: Re khetholla tšepe e nang le carbon e tlaase, tšepe ea carbon e mahareng, tšepe e nang le k'habone e phahameng, le tšepe ea motsoako ho latela lik'habone tsa thepa ea tšepe ea k'habone.1 tšepe e tlase ea carbon C%≤0.25% hangata e bitsoa tšepe ea A3 Chaena.Ha e le hantle e bitsoa 1008, 1015, 1018, 1022, joalo-joalo linaheng tse ling.Haholo-holo e sebelisetsoang lihlahisoa tse se nang litlhoko tse thata tse kang li-bolts tsa sehlopha sa 4.8, linate tsa sehlopha sa 4, li-screw tse nyenyane, joalo-joalo (Hlokomela: lisebelisoa tsa 1022 li sebelisoa haholo-holo bakeng sa lipekere tsa mohatla.) 2 Medium carbon steel 0.25% 3 High carbon steel C%> 0.45%.Litšepe tse 4 tsa alloy ha li sebelisoe 'marakeng: lisebelisoa tsa alloy li eketsoa ho litšepe tse tloaelehileng tsa khabone ho eketsa tse ling tsa thepa e khethehileng ea tšepe: joalo ka 35, 40 chromium molybdenum, SCM435, 10B38.Li-screws tsa Fangsheng li sebelisa haholo tšepe ea SCM435 chromium-molybdenum alloy, likarolo tse ka sehloohong ke C, Si, Mn, P, S, Cr, Mo. Ea bobeli, tšepe e sa hloekang: boemo ba ts'ebetso: 45, 50, 60, 70, 801 haholo-holo e arotsoe ka austenite (18%Cr, 8%Ni), ho hanyetsa mocheso o motle, ho hanyetsa ha kutu, le ho chesehela hantle.A1, A2, A42 martensite le 13% Cr li na le khanyetso e mpe ea kutu, matla a phahameng le ho se mamelle hantle.C1, C2, C4 ferritic tšepe e sa hloekang.18% Cr e na le ho halefisa ho molemo le ho hanyetsa kutu ho feta martensite.Lisebelisoa tse tsoang linaheng tse ling 'marakeng li tsoa haholo Japane.Ho ea ka boemo, e arotsoe haholo ka SUS302, SUS304, le SUS316.3. Koporo: Lintho tse sebelisoang hangata ke koporo…zinc-copper alloy.Mmaraka o sebelisa haholo koporo ea H62, H65, H68 joalo ka likarolo tse tloaelehileng.
Nako ea poso: Jun-21-2021